GDeck uses lightweight polystyrene infill blocks and EPS components to create an insulated suspended ground floor system that is faster and easier to install than traditional block and beam flooring.
Traditional beam and block flooring uses precast concrete beams with concrete blocks positioned between them. GDeck takes the proven principle of suspended beam construction and replaces the traditional infill with lightweight polystyrene infill blocks and panels.
The GDeck system consists of five beam-specific insulation components, designed for maximum mechanical and thermal performance:
Silver EPS insulation panel delivering high thermal efficiency and reducing dead load.
Designed for flexibility in layout and installation.
The backbone of the system, providing load-bearing strength.
High-density white EPS beam rail delivering >200 kPa support exactly where it’s needed.
For side-by-side (double) beam locations, eliminating concrete between beams.
Thermal barrier that significantly reduces heat loss at floor/wall junctions.
Available in four insulation depths (GT09, GT11, GT12, GT15) to achieve target U-values.
| System type | Height of insulation (mm) |
Typical U-value W/m2K |
|---|---|---|
| GT09 | 325 | 0.09 |
| GT11 | 300 | 0.11 |
| GT12 | 250 | 0.12 |
| GT15 | 230 | 0.15 |
| GT09 | |
|---|---|
| Height of Insulation (mm) | 325 |
| Typical U-value W/m2K | 0.09 |
| GT11 | |
|---|---|
| Height of Insulation (mm) | 300 |
| Typical U-value W/m2K | 0.11 |
| GT12 | |
|---|---|
| Height of Insulation (mm) | 250 |
| Typical U-value W/m2K | 0.12 |
| GT15 | |
|---|---|
| Height of Insulation (mm) | 230 |
| Typical U-value W/m2K | 0.15 |
The difference between traditional beam and block flooring and GDeck becomes particularly clear at installation.
Traditional systems can require hundreds of heavy concrete infill blocks to be manually moved and positioned between the beams.
GDeck uses lightweight polystyrene infill blocks and panels instead.
This helps deliver:
It’s a simple change in material that can make a significant difference across an entire development.
GDeck’s lightweight EPS components form part of a complete insulated suspended floor system. Explore GDeck’s technical information for further details on thermal performance, specification and compliance.