Award-Winning – Best Site Product 2026.

EPS Infill Blocks & Components for Insulated Block and Beam Floors

GDeck uses lightweight polystyrene infill blocks and EPS components to create an insulated suspended ground floor system that is faster and easier to install than traditional block and beam flooring.

The GDeck Insulated Block and Beam System

Traditional beam and block flooring uses precast concrete beams with concrete blocks positioned between them. GDeck takes the proven principle of suspended beam construction and replaces the traditional infill with lightweight polystyrene infill blocks and panels.

Polystyrene Infill Blocks & EPS Components

The GDeck system consists of five beam-specific insulation components, designed for maximum mechanical and thermal performance:

Full Panel

Silver EPS insulation panel delivering high thermal efficiency and reducing dead load.

Half Panel

Designed for flexibility in layout and installation.

Pre-Stressed Concrete Beam

The backbone of the system, providing load-bearing strength.

Rail

High-density white EPS beam rail delivering >200 kPa support exactly where it’s needed.

Multi Rail

For side-by-side (double) beam locations, eliminating concrete between beams.

Psi Strip®

Thermal barrier that significantly reduces heat loss at floor/wall junctions.

GDeck Profiles

Available in four insulation depths (GT09, GT11, GT12, GT15) to achieve target U-values.

System type Height of
insulation (mm)
Typical U-value
W/m2K
GT09 325 0.09
GT11 300 0.11
GT12 250 0.12
GT15 230 0.15

GT09
Height of Insulation (mm) 325
Typical U-value W/m2K 0.09

GT11
Height of Insulation (mm) 300
Typical U-value W/m2K 0.11

GT12
Height of Insulation (mm) 250
Typical U-value W/m2K 0.12

GT15
Height of Insulation (mm) 230
Typical U-value W/m2K 0.15

Why Replace Traditional Concrete Infill with EPS?

The difference between traditional beam and block flooring and GDeck becomes particularly clear at installation.

Traditional systems can require hundreds of heavy concrete infill blocks to be manually moved and positioned between the beams.

GDeck uses lightweight polystyrene infill blocks and panels instead.

This helps deliver:

 

 

It’s a simple change in material that can make a significant difference across an entire development.

 

 

GDeck’s lightweight EPS components form part of a complete insulated suspended floor system. Explore GDeck’s technical information for further details on thermal performance, specification and compliance.